Matt impregnat

akcesoria

MATT IMPREGNANT for concrete and plaster  

MATT IMPREGNANT is a water-based liquid sealer that penetrates concrete and reacts with the available lime in concrete. Thanks to the reaction between the inorganic compounds and lime in the pores of concrete, concrete abrasionresistance is increased and permeability reduced without any change in the surface aspect and shade. Thanks to its action, MATT IMPREGNANT strengthens mechanically substrate made of hydraulic binders andslows down the alkali process of concrete.

 

DOMAINS OF APPLICATION:

Waterproofing, protection and strengthening of concrete surfaces: exposed aggregate concret, decorative concrete, slabs in natural stone (limestone), street furniture, precast concrete elements.

 

METHOD OF USE:

Dosage rate: 150 to 200 g/m².

RocaSol M dosage rate depends on the surface porosity. The average is for one coat 1 litre for 5m².

 

SURFACE PREPARATION:

Surfaces must be clean, sound, and free of dust, dirt and contamination. If necessary, sweep all areas to be treated with a fine bristle broom, hose off with water and let dry.

 

APPLICATION:

Before application, surfaces must be wet. MATT IMPREGNANT is ready-to-use and is applied in two coats or more with spraying equipment. Spray freshon fresh in crossed coats until saturation of the surface. Spraying equipment will be cleaned with water, immediately after use.

 

PRECAUTIONS:

Stir before use. Apply MATT IMPREGNANT on clean, dust-free and dry surfaces. Puddles area are swept away with a wet rag. Store away from frost. Do not apply the product at temperatures below 5°C or above 30 °C and in case on hot surfaces. Do not apply when it is raining or on high temperatures.

 

SHELF LIFE: 12 months.